Search result for "S5860"

S5860-24XB-U switch, responsible for high-speed, efficient forwarding of large data traffic. It was then connected to the distribution layer’s <a href=https://www.fs.com/au/"https://www.fs.com/au/products/187997.html">SS860-20SQ switch via 25G stacking DAC cables, enabling stacking between the two switches. The SS860-20SQ switch aggregated traffic from the access layer and implemented policy control to optimize traffic forwarding paths and ensure security. The access layer achieved device-level redundancy through stacking between two <a href=https://www.fs.com/au/"https://www.fs.com/au/products/186775.html">S5860-48XMG-U switches. Overall, multiple S5860 series switches were distributed across decks (Main, ABCD, EFGH), providing physical redundancy and reducing single points of failure. The Airware enabled remote, centralized deployment and management of the S5860 series switches across the internet, simplifying management and greatly improving operational efficiency. By constructing a three-layer network architecture in the data center and leveraging the stacking feature of the S5860 series, the solution achieved high-bandwidth, low-latency data transmission. All switches were compatible with mainstream servers and storage devices, enabling seamless integration with existing IT infrastructure. This helped the customer complete the core network upgrade in the server room. For future network expansion, the customer could choose <a href=https://www.fs.com/au/"https://www.fs.com/au/products/207189.html">S5860 PicOS® switches</a> and use the AmpCon-Campus SDN controller for centralized management, automated configuration, and operation. This would enable them to easily build a flexible network to meet growing business needs. Hi Susie, really appreciate the support by the team. -Head of Engineering" data-v-3d5f962f>S5860 switches were deployed across core, distribution, and access layers to optimize traffic and reduce bottlenecks. Stacking technology ensured device-level redundancy, allowing seamless failover to other devices in case of failures. High-quality 10G LC patch cables and 25G DAC cables improved link bandwidth utilization, meeting high traffic demands. Airware allowed remote management over the Internet, reducing the need for on-site IT staff and lowering operational costs. Redundant hot-swappable power supplies and variable-speed fans ensured continuous operation during power or fan failures. Airware enabled 24/7 configuration and management from a central location, reducing both costs and time. S5860-24XB-U and S5860-48XMG-U provided up to 90W PoE output, simplifying network infrastructure and cabling. The S5860 series switches offered flexible 10G/25G/40G ports, stackable with optical modules or DAC/AOC cables. In case of network errors causing downtime, fast failover restored normal operation within 50-200 milliseconds. Free POC testing confirmed switch stacking, reducing deployment risk and cutting procurement time and costs by 30%. The client, an Internet Service Provider (ISP) with network infrastructure across multiple cities, provided high-bandwidth internet access, data center interconnect, and enterprise-grade dedicated lines. They were highly satisfied with our products and services, having established a long-term partnership with us. As their business grew, they sought to optimize their server room's core network, enhance bandwidth utilization, simplify management, and improve equipment redundancy. The traditional stacking solutions required identical device models and software versions. However, the customer aimed to stack different models to enhance management and optimize resource utilization. Some existing links were overloaded, leading to inefficient bandwidth utilization and potential congestion. The absence of an effective disaster recovery mechanism posed a risk of link interruptions during core device failures. Varying device models and configurations further complicated maintenance. The customer planned to start the network optimization project within three weeks, emphasizing on-time delivery to ensure the smooth launch of new services. The customer has built a three-tier network architecture in the data center, including the core layer, distribution layer, and access layer. The core layer, located in the server room, deployed the S5860-24XB-U switch, responsible for high-speed, efficient forwarding of large data traffic. It was then connected to the distribution layer’s SS860-20SQ switch via 25G stacking DAC cables, enabling stacking between the two switches. The SS860-20SQ switch aggregated traffic from the access layer and implemented policy control to optimize traffic forwarding paths and ensure security. The access layer achieved device-level redundancy through stacking between two S5860-48XMG-U switches. Overall, multiple S5860 series switches were distributed across decks (Main, ABCD, EFGH), providing physical redundancy and reducing single points of failure. The Airware enabled remote, centralized deployment and management of the S5860 series switches across the internet, simplifying management and greatly improving operational efficiency. By constructing a three-layer network architecture in the data center and leveraging the stacking feature of the S5860 series, the solution achieved high-bandwidth, low-latency data transmission. All switches were compatible with mainstream servers and storage devices, enabling seamless integration with existing IT infrastructure. This helped the customer complete the core network upgrade in the server room. For future network expansion, the customer could choose S5860 PicOS® switches and use the AmpCon-Campus SDN controller for centralized management, automated configuration, and operation. This would enable them to easily build a flexible network to meet growing business needs. Hi Susie, really appreciate the support by the team. -Head of Engineering

S5860-20SQ and <a href=https://www.fs.com/au/"https://www.fs.com/products/206807.html">S5860-24MG-U, were recommended for their robust performance and support for high-bandwidth MLAG configurations. In particular, the S5860-24MG-U comes equipped with 24x 100M/1000M/2.5G/5G PoE++ ports, catering to high wireless bandwidth environments. To enable the client to test crucial features, FS provided access to the free virtual machine (VM) <a href=https://www.fs.com/au/"https://www.fs.com/products/195659.html">PicOS-V. This allowed the client to verify switch configurations without the need to wait for physical hardware. During the design phase, FS worked closely with the client to understand their initial network topology. Recognizing a limitation in the number of uplink ports on the S5860-24MG-U, FS’s technical team optimized the network design. The improved solution utilized the 40G ports on the S5860-20SQ switches to establish MLAG-based device-level link redundancy, with their 25G ports connecting to the S5860-24MG-U switches. This approach enhanced bandwidth efficiency while ensuring the reliability and scalability of the network. Although the initial requirement was for 100G bandwidth, the client found that leveraging an MLAG architecture with a maximum of 80G bandwidth sufficiently met their business needs and network upgrade goals. The optimized solution not only improved port utilization but also enhanced network reliability through redundant connections, ensuring smooth and uninterrupted operations. Throughout the project, FS maintained close collaboration with the client, offering proactive support to address challenges and ensure the solution met both current and future demands." data-v-3d5f962f>Leveraged PicOS® S5860 series switches to achieve high-bandwidth interconnectivity, meeting growing business demands. Deployed an MLAG redundant solution to ensure uninterrupted network services. Achieved 80Gbps bandwidth aggregation through MLAG architecture. S5860-24MG-U supports 100M/1000M/2.5G/5G PoE++ ports for enhanced connectivity. Verified switch configurations at zero cost using the free PicOS-V virtual machine. A Polish company providing operational services aims to enhance its IT infrastructure by upgrading to higher-performance switches in its two server rooms. This upgrade is necessary to accommodate the increasing demands of its business. The client required switches equipped with 2.5Gb PoE ports to support their network and aimed to establish a 100G bandwidth architecture. Additionally, they sought a solution that would allow them to evaluate network performance and feature reliability through pre-purchase testing of critical functionalities, including BGP and OSPF. FS proposed a network solution tailored to the client's specific needs. The PicOS® switches, S5860-20SQ and S5860-24MG-U, were recommended for their robust performance and support for high-bandwidth MLAG configurations. In particular, the S5860-24MG-U comes equipped with 24x 100M/1000M/2.5G/5G PoE++ ports, catering to high wireless bandwidth environments. To enable the client to test crucial features, FS provided access to the free virtual machine (VM) PicOS-V. This allowed the client to verify switch configurations without the need to wait for physical hardware. During the design phase, FS worked closely with the client to understand their initial network topology. Recognizing a limitation in the number of uplink ports on the S5860-24MG-U, FS’s technical team optimized the network design. The improved solution utilized the 40G ports on the S5860-20SQ switches to establish MLAG-based device-level link redundancy, with their 25G ports connecting to the S5860-24MG-U switches. This approach enhanced bandwidth efficiency while ensuring the reliability and scalability of the network. Although the initial requirement was for 100G bandwidth, the client found that leveraging an MLAG architecture with a maximum of 80G bandwidth sufficiently met their business needs and network upgrade goals. The optimized solution not only improved port utilization but also enhanced network reliability through redundant connections, ensuring smooth and uninterrupted operations. Throughout the project, FS maintained close collaboration with the client, offering proactive support to address challenges and ensure the solution met both current and future demands.

40G DACs</a>, creating a robust MLAG redundancy architecture. With Germany warehouse and expert topology design, the client upgraded their network quickly. This pre-validation eliminated manual debugging and ensured the factory went live exactly on schedule. Faced with limited internal resources, the client leveraged the free AmpCon-Campus service included with their FS <a href=https://www.fs.com/au/"https://www.fs.com/products/207189.html">S5860-20SQ PicOS® switches</a>. This enabled Day 0 to Day 2+ automated lifecycle management and ZTP, simplifying device configuration and monitoring. With expert FS support, the client maintained a stable network that reduced troubleshooting time to just 5 minutes. By choosing FS hardware for its excellent compatibility, the client seamlessly connected their existing Dell infrastructure. Rigorous testing ensured stable performance across all devices. This choice allowed the client to bridge different brands easily and build a reliable, plug-and-play network while significantly reducing technical issues. The FS campus network solution ensured an on-schedule rollout by combining Germany stock with pre-validated S5860 PicOS® switches. By integrating 40G DACs, the client achieved a scalable 10G network that supports smart manufacturing without future hardware overhauls. By pairing FS switches with the existing Dell infrastructure, the deployment maintained seamless compatibility while ensuring stable VLAN segmentation and MLAG for high availability. Leveraging free AmpCon-Campus services for automated ZTP, the client simplified complex management tasks, securing a reliable, high-performance network foundation." data-v-3d5f962f>Achieved rapid solution delivery backed by Germany warehouse inventory, accelerating the go-live of critical production expansion plans. Deployed AmpCon-Campus for automated ZTP, reducing manual errors and streamlining switch management. Built a high-bandwidth, intelligent 10G factory network with FS full-lifecycle support, enabling refined manufacturing management. FS S5860-20SQ PicOS® switches with 40G QSFP+ ports drive intelligent upgrades. AmpCon-Campus provides Day 0 to Day 2+ automated lifecycle management. 1-working-day solution response for a seamless 10G factory network rollout. 100% compatible and plug-and-play with existing 10GbE Dell switches. Offering rapid 12-hour delivery directly from our Germany stock. 24/7 end-to-end technical support simplifies network deployment. Established in 1987, the client is a leader in Italian-design bathroom furniture, renowned for its commitment to quality and detail. To overcome challenges with network complexity, multi-vendor compatibility, and deployment risks, the client implemented FS’s robust 10G factory campus network solution. This deployment simplified their complex topology and provided essential technical support, creating a stable foundation for their intelligent manufacturing upgrade. Accelerating the intelligent manufacturing upgrade required a tight deployment timeline with zero room for error. The client lacked the technical expertise to validate their network topology, creating significant risks of implementation failure and project delays. Furthermore, integrating new hardware with existing Dell infrastructure posed serious multi-vendor compatibility risks. Without guaranteed interoperability for network configurations, the client faced potential link instability and data loss within their heterogeneous environment. Finally, managing a complex network through manual configuration strained their limited resources. Without professional support or automation, the IT team struggled with operational inefficiencies and slow troubleshooting, threatening long-term stability. Therefore, they sought a validated, easy-to-manage solution to ensure seamless integration and reliable performance. To ensure a seamless 10G rollout, the client used three S5860-20SQ PicOS® switches with flexible 1/10/25/40GbE ports and 40G DACs, creating a robust MLAG redundancy architecture. With Germany warehouse and expert topology design, the client upgraded their network quickly. This pre-validation eliminated manual debugging and ensured the factory went live exactly on schedule. Faced with limited internal resources, the client leveraged the free AmpCon-Campus service included with their FS S5860-20SQ PicOS® switches. This enabled Day 0 to Day 2+ automated lifecycle management and ZTP, simplifying device configuration and monitoring. With expert FS support, the client maintained a stable network that reduced troubleshooting time to just 5 minutes. By choosing FS hardware for its excellent compatibility, the client seamlessly connected their existing Dell infrastructure. Rigorous testing ensured stable performance across all devices. This choice allowed the client to bridge different brands easily and build a reliable, plug-and-play network while significantly reducing technical issues. The FS campus network solution ensured an on-schedule rollout by combining Germany stock with pre-validated S5860 PicOS® switches. By integrating 40G DACs, the client achieved a scalable 10G network that supports smart manufacturing without future hardware overhauls. By pairing FS switches with the existing Dell infrastructure, the deployment maintained seamless compatibility while ensuring stable VLAN segmentation and MLAG for high availability. Leveraging free AmpCon-Campus services for automated ZTP, the client simplified complex management tasks, securing a reliable, high-performance network foundation.